Products
CLEVA CRETE 842 MVRA
- Resolves moisture vapour egress
- Waterproofing for ingress/egress
- Reo corrosion protection inhibitor
CLEVA CRETE 842 MVRA is an admixture that is specifically designed to solve the moisture vapour issues in resilient flooring finishes.
CLEVA CRETE 842 WP
- Resolves moisture vapour egress
- Waterproofing for ingress/egress
- Reo corrosion protection inhibitor
CLEVA CRETE 842 RP
- Resolves moisture vapour egress
- Waterproofing for ingress/egress
- Reo corrosion protection inhibitor
Vinyl Moisture Issue Solutions Adelaide
Vinyl moisture issue solutions are specialised products and techniques designed to address problems caused by moisture intrusion under vinyl flooring. They are crucial as excess moisture vapour can release the glue under the vinyl, damaging it, compromise indoor air quality, and lead to mould growth, potentially causing health hazards and costly flooring replacement. Vinyl moisture issue solutions in Adelaide are indispensable, and CLEVA CRETE stands as the ultimate destination to find these exceptional products. Excess moisture can wreak havoc on vinyl flooring, threatening both its integrity and the quality of indoor air. Our range of solutions goes beyond preserving flooring durability; they extend to enhancing indoor air quality and preventing mould-related health hazards.
- Preserve Flooring Durability: Vinyl moisture issue solutions protect your flooring from damage, ensuring its longevity and saving you the cost of premature replacement.
- Enhance Indoor Air Quality: By preventing moisture-related problems, these solutions help maintain healthier indoor air quality.
- Prevent Mould and Health Hazards: Eliminating excess moisture mitigates the risk of mould growth, safeguarding your health and well-being.
At CLEVA CRETE, we have the best vinyl moisture issue solutions for your needs. Our professional team can help you choose the right products and techniques for your specific situation. We have the experience and expertise to handle any vinyl flooring challenges by implementing our second to none vinyl moisture issue solutions. With CLEVA CRETE, you’re not only getting top-quality solutions but also the support of a professional team that understands the importance of moisture control. Contact us today for specific information and to safeguard your vinyl flooring investment.
About Us
CLEVA CRETE is Australia’s pre-eminent concrete admixture company.
CLEVA CRETE are a South Australian, independent, and privately owned company specialising in waterproofing admixtures for the construction industry in the commercial, infrastructure, military and government sector. We have over 10 employees, several private contractors, and a robust growth strategy.
Founders have 25 years of experience in researching concrete behaviour and durability and due to our thorough R&D in concrete moisture issues we stand as a reputable consultant in this space.
Our technology disrupts normal capillary formation, delivering a proven solution where ultra-low permeability and superior long-term shrinkage reduction is required. The admixtures that we offer, lower the heat of hydration, reduce slab curl, add durability and longevity to your concrete structure and greatly reduce the risk of early onset concrete cancer.
We’re well aware of how fast paced the construction industry is so we strive to go above and beyond for our customers and ensure that we are on top of our communication before, during and after project inclusion.
Testimonials
Gianni Vial – VALTEC Constructions
Adelaide High School
Gianni Vial, who has been pouring concrete for 25 years, shares his experience with using CLEVA CRETE 842 MVRA for the Adelaide High School Project. His comments include his initial hesitation, the outcome, and advantages of using our admixture as well as his thoughts on using this admixture for future projects.
Andrew Cundle – BADGE Construction
Adelaide High School
Project Manager Andrew Cundle shares his experience utilising 842 MVRA in the four storey building in Adelaide CBD. The most value that BADGE received from using our admixture is the cost and time benefit. As they did not need a moisture barrier which cost them 5x the price, they had an average saving of $20per sqm which equated to thousands of dollars across a 4- storey build. In terms of time, they were able to deprop and move onto the next level faster and lay flooring 14 days following the pour.
Steve Wesbroom, Joe Parisi – Schiavello Construction
Gawler ED
Site manager Steve Wesbroom, along with Joe Parisi, shared their experience using both the 842 MVRA admixture and the 842 WP admixture. They used 842 MVRA for the ground slab and the WP for the plant room, to ensure no moisture ingress or egress was possible. His comments reflect his experience with us and how the concreters found it working with the CLEVA CRETE admixtures.
Our Partners
